FaciliPro™ 35 Alkaline Floor Cleaner For Select 4 and QC™ Ultra-Concentrates Dispensing Systems - 2/1.3L

Dual-purpose alkaline floor cleaner for daily maintenance and scrub and recoat use. 

Product Features

• Ultra-low foaming technology increases auto scrubber productivity
• Clean, fresh scent is less disruptive for customers, residents and guests
• Superior cleaning ability vs. amine or surfactant only floor cleaners
• For use on finished resilient and other natural and man-made floor types

DIRECTIONS FOR USE

Automatic Scrubber

• Position wet floor signs. Put on proper safety equipment.
• Mix cleaning solution in the auto scrubber and mop bucket using appropriate dilution rate per gallon of water.
• Position the red pad onto the auto scrubber.
• Using the auto scrubber, apply the cleaning solution, scrub and pick up residue in one operation.
• Mop the corners and edges manually and remove any excess solution not recovered by the auto scrubber.
• Thoroughly clean and store all equipment and pads after use.
• Remove wet floor signs.

Mop and Bucket

• Position wet floor signs. Put on proper safety equipment.
• Mix cleaning solution in the mop bucket using appropriate dilution rate per gallon of water.
• Use a cotton or synthetic mop with cleaning solution.
• Partially wring out mop and apply cleaning solution to approximately 10' by 10' area of floor surface. Thoroughly wring out mop in bucket and pick up excess solution from the 10' by 10' area.
• Repeat step 4 until the entire floor area has been cleaned.
• Thoroughly clean and store all equipment after use.
• Remove wet floor signs.

SDS Sheet (English)